Ford Crown Victoria Center Links
www.p71interceptor.com

Part Number	From	To	Comments	Suggested Retail
D9AZ-3304-A	1979	1994	Compatible with older style pitman arm and older style tie rod assemblies	$145.22
F5AZ-3304-A	1995	2002	Compatible with newer style pitman arm and newer style tierod assemblies	$104.78
Moog DS80748	1995	2002	Aftermarket Moog Centerlink Compatible with newer style pitman arm and newer style tierod assemblies

Notes:

• The drag link typically will last the entire life of the vehicle. But replacement may be required if it becomes bent by a collision involving either of the front wheels. Or the idler arm stud becomes loose in the link due to a collision or the hammer wear effect of prolonged vehicle operation with defective front suspension components.
• The pitman arm, centerlink and tie rod units were revised in the 1995 model year to improve the toe curve. "Upgrading" a pre-1995 vehicle to the new style center link is possible if all of the linkage parts mentioned are replaced with their 1995+ counterparts. The spline design on the steering gear output shaft is the same among all 1979-2002 crown victorias, lincoln town cars, and mercury grand marquises. As is the design of the hole in the steering knuckle where the tierod passes through.

www.p71interceptor.com